Audi Q2 Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·

·
Registered
Joined
·
192 Posts
They are held in by clips.....lots of them. You might need to take the bumper off to access them all.

The silver part will have the 'male' clip which has a return lip on the end that stops it pulling out of the black part. Its hard to explain the technique but you need to push the 'male' clip back and then pull it out. You will probably need a plastic trim tool kit and a pick tool to help.
 
1 - 3 of 3 Posts
Top