Audi Q2 Forum banner
1 - 11 of 11 Posts

·
Registered
Joined
·
9 Posts
Discussion Starter · #1 ·
Hello all, can some one have a look under their rear bumper on the drivers side near the rear wheel and do you have a removeable panel on the valance as mine appears to be missing. Thanks
 

·
Registered
Joined
·
118 Posts
There is a small square panel which has to be removed to get access to fit the towing anchor, without measuring it it is probably about 30mm square.
 

·
Registered
Joined
·
118 Posts
Hi, hopefully this picture helps, mine is a S-line black edition so the rear valance is a possibly bit different but there does look like there does look like there is another panel. I will try and get better pictures tomorrow when I now know what I'm looking for and also hopefully not be raining.
 

Attachments

·
Registered
Joined
·
118 Posts
Probably best getting a picture of the valance/bumper from a similar trim to your car, when you look at the Q2 configurator the S-Line and the Sport/SE are quite a bit different. Presuming your car is a Sport or SE the configurator looks very similar to your valance/bumper.
 
1 - 11 of 11 Posts
Top