Audi Q2 Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Hi,
I have replaced the rear pads on my q2 today.
I disengaged the hand break. Removed the Moter from the calliper, released the spindle and pushed the piston back.
I reassembled the calliper and all is working fine.

the car now shows multiple faults on the display. Esc fault, hill assist unavailable, audi assist unavailable, parking assist unavailable.
I have check multiplug connections around the calliper and all seem ok.
Does anyone have any idea what could be the problem?
 

·
Registered
Joined
·
108 Posts
Best to get an OBD 11 fault reader for Audis - not just a cheap one but one that allows you to re-set various functions. I found one for around £45, mainly to re-set the service light and it's been great. Link to my original purchase has disappeaered but search around and you should find something suitable.
 

·
Registered
Joined
·
3 Posts
Best to get an OBD 11 fault reader for Audis - not just a cheap one but one that allows you to re-set various functions. I found one for around £45, mainly to re-set the service light and it's been great. Link to my original purchase has disappeaered but search around and you should find something suitable.
I second this comment....for some reason back then I was so hesitant to get a good OBD and when I did oh boy did it change the game to me :)
 
1 - 3 of 3 Posts
Top