[kennyshane84]

Hi all, just wanted to share my success in changing the welcome logo and dials today. Found out how to do this by trial and error! Now I have the SQ2 dials and welcome logo! Trying to configure the VC to show the sport dials but apparently it's a hard coded thing. The italic font for the numbers only came after I restarted the car later. Not reflected in this video.

https://drive.google.com/open?id=1EjwAt098isHUTHEEp3G9JB1HCxG0a0Cq

Also got traffic sign recognition activated in Melbourne! Woohoo!

https://drive.google.com/open?id=1R8ZfAmy4N1Myhk47r0h_NY2xsOVtm_u2

 

[kennyshane84]

New update on how to change the MMI Startup Logo!

Under 5F- Information Electric

Byte 18
Q2 - Bits 2, 3 and 5 are ticked (2C)
Q2 Quattro - Bits 0, 2, 3, 5 are ticked (2D)

Now to find out how to get the SQ2 Quattro logo!

 

[kennyshane84]

New update on how to change the MMI Startup Logo!

Under 5F- Information Electric

Byte 18
Q2 - Bits 2, 3 and 5 are ticked (2C)
Q2 Quattro - Bits 0, 2, 3, 5 are ticked (2D)

Now to find out how to get the SQ2 Quattro logo!

Found it!

5F - Information Electric
Byte 18
SQ2 Quattro - Enter the Binary 00101110 for 2E

Now to find out how to change the car icon...

Video below!

https://drive.google.com/open?id=16OzD5XaTMV0rQuR7zFOtcV7kzYku9ESm

 

[Thailand]

How can we do that ?

 

[Thailand]

It look no so easy

 

[kennyshane84]

It look no so easy

You need the Ross-TECH cable and VCDS software

 

[Thailand]

Thank you ..

 

[IanQ2]

Hi Kenny, going to attempt this soon, can you PM me with all the code to do the dials?

I note above the welcome details for the MMI

Have you done any other VCDS mods? Is needle sweep possible on these?

Would love to get the sport dials also

 

[kennyshane84]

Hi Kenny, going to attempt this soon, can you PM me with all the code to do the dials?

I note above the welcome details for the MMI

Have you done any other VCDS mods? Is needle sweep possible on these?

Would love to get the sport dials also

Hi Ian

Better still, I should post it up here. Needle sweep is pretty easy if I don't remember wrongly - similar to the A3 8V instructions. Sport dials come with the SQ2 dials, also fairly easy to do. I need to check what i ticked in the modules because the Q2 configuration hasn't been updated in the latest version of VCDS. Let me check and get back to you.

 

[IanQ2]

Thanks Kenny, appreciate your help

 

[davorius007]

Hey, people Could you help how to activate a SQ2 Dials in my Audi Q2 with virtual cockpit.

Thank you in advance

 

[kennyshane84]

Hey, people Could you help how to activate a SQ2 Dials in my Audi Q2 with virtual cockpit.

Thank you in advance

Read my first post - the codes are there. You need VCDS software and the dongle to attach to the port under your steering column.

 

[davorius007]

Hey, Of course I read you all posts. I made to get to chagne screen in 5F for sq2 but I am asking you for sport dials on virtual cockpit ? How to get italic numbers like on s4 or s5 or sq2 ??? Sport dials , you did not posto how to change ? Which bit and byte or adaptation in instruments ????

Thank you kindly.
Davor

 

[IanQ2]

Has anyone got this working via OBD11?

Or even VCDS? I could do with some pointers!