Edition 1

[IanQ2]

little update

I have been busy working out a solution to get the TTRS/R8 steering wheel to work in the Q2 and all buttons function. I have a donor wheel and airbag ready to go, just need to get the buttons and make it all work next. The LED's will be changed to white to match the rest of the Q2 interior (they are red in the TT)

I will carbon the top and bottom of the wheel then retrim the sides. The airbag was fully stripped down to paint the Audi rings and outer trim ring.

[IanQ2]

I have also been busy trimming the interior panels (A, B and C and then headliner and sun visors) in Dinamica which is like an Alcantara material as found from factory on the higher models. It is the same material that the door cards, gear gaiter and knee pads are trimmed in.

[IanQ2]

and the steering cowel in carbon

[frazzeld]

Have you got any photos of it in driving height

[apadilc1]

Can you tell the sequence to remove center console?

[Zichao]

wow,This is amazing.

[IanQ2]

I have been trimming the lower kick panel plastics in Dinamica, still got the b pillar ones to do but the rest are all done.

I will move onto the lower dash section next.

The aim is to get rid of as much plastic as possible and have a far nicer interior.

[IanQ2]

Also almost ready to fit my R8 steering wheel. Its missing its start/stop and drive select buttons in the picture along with the lower trim but its all done now ready to go in.

I have done the top, bottom and the full rear in carbon. Sides have been retrimmed in nappa with a tan stitch to match the OEM trim.

The silver trim that is normal to the wheel has been painted Audi Manhattan Grey which is the same colour as the arches/lower bumpers on the Edition 1

[mr c]

Love this thread on what you have done, I see your seat belts are a tan colour to match the leather inlays on the seats are they original? I have the Edition 1 and my belts are black.
I think what you done with the Dinamica is amazing the door cards on our Q2’ s for a premium brand is shocking and really cheap.

[IanQ2]

Thank you

The belts are aftermarket, they were re-webbed by FDTS Seatbelts. A simple modification that lifts the interior.

The Q2 is such a plastic cabin from factory, I just couldn't live with it standard. Its getting to how I want it now though.