Hi All
I wonder if anyone else have had the same problem as me with the car's front wiper blades. My car is just shy of 4 years old and in that time I have changed the wiper blades every year due to incessant scraping noise with the front wipers. It can happen when its raining heavily or just drizzling. It will carry on for a while then will stop for a while and then start again. When I have changed the wiper blades, they would be OK for a couple of weeks and then start. I have followed every advice available on the net, like cleaning the blades regularly, cleaning the windscreen but nothing makes any difference. I have not scrimped on the blades either, they have always been Bosch.
It can be very painful driving with such scraping noise, especially a hearing aid wearer like me. The rear wiper has no such problem. The rear wiper in my car is still the original one. I am at a loss now as to what to do next.
If anyone else have had similar problem I would love to know whether they have managed to rectify it and how.
Thanks, Stay Safe...
Front Wiper Blades Scraping
Re: Front Wiper Blades Scraping
Have you tried to clay bar the screen to remove any build up on it. Also do you use anything like rained as this can cause a dragging effect.
Re: Front Wiper Blades Scraping
Hi,
I had trouble for ages on my A1 with juddering wipers and spent a fortune on all types of blades that were advertised as judder and squeak free! Just about to give up when my local Audi dealer said the wiper arms were slightly bent and needed replacing. He said this is usually caused when they are pulled away from the screen rather than using the ‘park method’ before cleaning. Worth checking as it was only when comparing the arms with the new ones I could see the slight bend.
I had trouble for ages on my A1 with juddering wipers and spent a fortune on all types of blades that were advertised as judder and squeak free! Just about to give up when my local Audi dealer said the wiper arms were slightly bent and needed replacing. He said this is usually caused when they are pulled away from the screen rather than using the ‘park method’ before cleaning. Worth checking as it was only when comparing the arms with the new ones I could see the slight bend.
2020 Q2 35 tfsi Black Edition s-tronic, Mythos Black and climate control.
Mods so far using Carista, needle sweep on startup.
Mods so far using Carista, needle sweep on startup.