Seat removal

All Audi Q2 related discussions
Post Reply
Garry wynne
Posts: 2
Joined: Fri Mar 05, 2021 5:56 pm

Seat removal

Post by Garry wynne » Fri Mar 05, 2021 6:10 pm

Hi I’m new to this place thanks for having me I have a problem and looking for some advice I’m receiving my Q2 in next week or two so I’m wondering if anyone knows if it would be possible to remove the drivers seat and re install it further back and have it working as usual but with a lot more leg room. I wondering if there are any pre-drilled holes for bolting it back further from steering wheel. Thanks very much

Argyll
Posts: 99
Joined: Sat Mar 11, 2017 10:13 am

Re: Seat removal

Post by Argyll » Fri Mar 05, 2021 7:05 pm

I wouldn't be surprised if there were insurance/safety implications due to the efficacy of the airbag, but I'm just guessing.

Geh2020
Posts: 104
Joined: Mon Feb 10, 2020 12:38 pm

Re: Seat removal

Post by Geh2020 » Fri Mar 05, 2021 9:23 pm

Hi,

Welcome to the forum.

I would say it is extremely doubtful there are any pre-drilled holes. And if you did find a way around this it could have serious implications around the insurance and more importantly, airbag deployment! Goodness only knows what would happened if you had an accident and the modification was the cause!
2020 Q2 35 tfsi Black Edition s-tronic, Mythos Black and climate control.

Mods so far using Carista, needle sweep on startup.

Garry wynne
Posts: 2
Joined: Fri Mar 05, 2021 5:56 pm

Re: Seat removal

Post by Garry wynne » Thu Mar 11, 2021 9:47 pm

I’m hoping that the modification of the seat will be covered by motorbility mods I know some mods can be done under motorbility so I’m hoping this can by

Post Reply