Edition 1

Post pictures of your Audi Q2 here
IanQ2
Posts: 117
Joined: Thu Feb 16, 2017 4:58 pm

Re: Edition 1

Post by IanQ2 » Tue Jul 23, 2019 2:08 pm

little update

I have been busy working out a solution to get the TTRS/R8 steering wheel to work in the Q2 and all buttons function. I have a donor wheel and airbag ready to go, just need to get the buttons and make it all work next. The LED's will be changed to white to match the rest of the Q2 interior (they are red in the TT)

I will carbon the top and bottom of the wheel then retrim the sides. The airbag was fully stripped down to paint the Audi rings and outer trim ring.

wheel1.jpg

wheel4.jpg

wheel3.jpg

wheel2.jpg



IanQ2
Posts: 117
Joined: Thu Feb 16, 2017 4:58 pm

Re: Edition 1

Post by IanQ2 » Tue Jul 23, 2019 2:13 pm

I have also been busy trimming the interior panels (A, B and C and then headliner and sun visors) in Dinamica which is like an Alcantara material as found from factory on the higher models. It is the same material that the door cards, gear gaiter and knee pads are trimmed in.

trim2.jpg

trim1.jpg

trim4.jpg

trim3.jpg



IanQ2
Posts: 117
Joined: Thu Feb 16, 2017 4:58 pm

Re: Edition 1

Post by IanQ2 » Tue Jul 23, 2019 2:17 pm

and the steering cowel in carbon

cowl 1.JPG

cowl 2.jpg



frazzeld
Posts: 7
Joined: Mon Jul 15, 2019 10:47 pm

Re: Edition 1

Post by frazzeld » Sat Aug 17, 2019 7:17 am

Have you got any photos of it in driving height


Post Reply

Return to “Members Gallery”