Edition 1

Post pictures of your Audi Q2 here
IanQ2
Posts: 155
Joined: Thu Feb 16, 2017 4:58 pm

Re: Edition 1

Post by IanQ2 » Tue Jul 23, 2019 2:08 pm

little update

I have been busy working out a solution to get the TTRS/R8 steering wheel to work in the Q2 and all buttons function. I have a donor wheel and airbag ready to go, just need to get the buttons and make it all work next. The LED's will be changed to white to match the rest of the Q2 interior (they are red in the TT)

I will carbon the top and bottom of the wheel then retrim the sides. The airbag was fully stripped down to paint the Audi rings and outer trim ring.

wheel1.jpg

wheel4.jpg

wheel3.jpg

wheel2.jpg


IanQ2
Posts: 155
Joined: Thu Feb 16, 2017 4:58 pm

Re: Edition 1

Post by IanQ2 » Tue Jul 23, 2019 2:13 pm

I have also been busy trimming the interior panels (A, B and C and then headliner and sun visors) in Dinamica which is like an Alcantara material as found from factory on the higher models. It is the same material that the door cards, gear gaiter and knee pads are trimmed in.

trim2.jpg

trim1.jpg

trim4.jpg

trim3.jpg


IanQ2
Posts: 155
Joined: Thu Feb 16, 2017 4:58 pm

Re: Edition 1

Post by IanQ2 » Tue Jul 23, 2019 2:17 pm

and the steering cowel in carbon

cowl 1.JPG

cowl 2.jpg


frazzeld
Posts: 8
Joined: Mon Jul 15, 2019 10:47 pm

Re: Edition 1

Post by frazzeld » Sat Aug 17, 2019 7:17 am

Have you got any photos of it in driving height

apadilc1
Posts: 6
Joined: Sun Dec 01, 2019 6:46 pm

Re: Edition 1

Post by apadilc1 » Sun Dec 08, 2019 6:55 am

Can you tell the sequence to remove center console?

Zichao
Posts: 4
Joined: Thu Dec 19, 2019 5:24 pm

Re: Edition 1

Post by Zichao » Sun Dec 22, 2019 4:41 pm

wow,This is amazing.

IanQ2
Posts: 155
Joined: Thu Feb 16, 2017 4:58 pm

Re: Edition 1

Post by IanQ2 » Tue Apr 28, 2020 9:55 am

I have been trimming the lower kick panel plastics in Dinamica, still got the b pillar ones to do but the rest are all done.

I will move onto the lower dash section next.

The aim is to get rid of as much plastic as possible and have a far nicer interior.

trim 5.jpg

trim 4.jpg

trim 3.jpg

trim 1.jpg

trim 2.jpg


IanQ2
Posts: 155
Joined: Thu Feb 16, 2017 4:58 pm

Re: Edition 1

Post by IanQ2 » Tue Apr 28, 2020 10:14 am

Also almost ready to fit my R8 steering wheel. Its missing its start/stop and drive select buttons in the picture along with the lower trim but its all done now ready to go in.

I have done the top, bottom and the full rear in carbon. Sides have been retrimmed in nappa with a tan stitch to match the OEM trim.

The silver trim that is normal to the wheel has been painted Audi Manhattan Grey which is the same colour as the arches/lower bumpers on the Edition 1

R8 5.jpg

R8 4.jpg

R8 3.jpg

R8 2.jpg

R8 1.jpg


mr c
Posts: 77
Joined: Fri Aug 24, 2018 4:24 pm

Re: Edition 1

Post by mr c » Tue Apr 28, 2020 10:58 am

Love this thread on what you have done, I see your seat belts are a tan colour to match the leather inlays on the seats are they original? I have the Edition 1 and my belts are black.
I think what you done with the Dinamica is amazing the door cards on our Q2’ s for a premium brand is shocking and really cheap.

IanQ2
Posts: 155
Joined: Thu Feb 16, 2017 4:58 pm

Re: Edition 1

Post by IanQ2 » Tue Apr 28, 2020 11:36 am

Thank you

The belts are aftermarket, they were re-webbed by FDTS Seatbelts. A simple modification that lifts the interior.

The Q2 is such a plastic cabin from factory, I just couldn't live with it standard. Its getting to how I want it now though.

Post Reply